广州屏触电子科技有限公司

[2026-01-05 10:03:13.126]# RECV ASCII>

 DDR V1.16 6f71c736ce typ 23/03/02-20:01:48

In

LP4/4x derate en, other dram:1x trefi

ddrconfig:7

LPDDR4X, 324MHz

BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB

tdqss: cs0 dqs0: -48ps, dqs1: -120ps, dqs2: -144ps, dqs3: -192ps, 

tdqss: cs1 dqs0: -48ps, dqs1: -120ps, dqs2: -144ps, dqs3: -217ps, 

change to: 324MHz

PHY drv:clk:36,ca:36,DQ:29,odt:0

vrefinner:24%, vrefout:41%

dram drv:40,odt:0

clk skew:0x65

change to: 528MHz

PHY drv:clk:36,ca:36,DQ:29,odt:0

vrefinner:24%, vre

[2026-01-05 10:03:13.141]# RECV ASCII>

fout:41%

dram drv:40,odt:0

clk skew:0x58

change to: 780MHz

PHY drv:clk:36,ca:36,DQ:29,odt:0

vrefinner:24%, vrefout:41%

dram drv:40,odt:0

clk skew:0x58

change to: 1560MHz(final freq)

PHY drv:clk:36,ca:36,DQ:29,odt:60

vrefinner:16%, vrefout:22%

dram drv:40,odt:80

vref_ca:00000071

clk skew:0x30

cs 0:

the read training result:

DQS0:0x2f, DQS1:0x32, DQS2:0x34, DQS3:0x2f, 

min  : 0xc  0xc  0xf  0xc  0x2  0x2  0x7  0x2 , 0x9  0x9  0x2  0x1 0x10  0xb  0xf  0x7 ,

      0x10 0x11  0xd  0x9  0x7 

[2026-01-05 10:03:13.144]# RECV ASCII>

 0x2  0x4  0x6 , 0xb  0x7  0x6  0x2 0x10  0xf  0xc 0x10 ,

mid  :0x24 0x26 0x29 0x25 0x1a 0x1c 0x20 0x1b ,0x23 0x22 0x1b 0x1c 0x28 0x25 0x28 0x22 ,

      0x2b 0x2b 0x25 0x24 0x1f 0x1c 0x1d 0x20 ,0x24 0x21 0x21 0x1b 0x2a 0x29 0x25 0x28 ,

max  :0x3c 0x41 0x43 0x3f 0x32 0x37 0x3a 0x35 ,0x3d 0x3b 0x34 0x37 0x41 0x3f 0x41 0x3d ,

      0x47 0x46 0x3e 0x40 0x37 0x37 0x36 0x3a ,0x3e 0x3b 0x3c 0x35 0x44 0x44 0x3f 0x41 ,

range:0x30 0x35 0x34 0x33 0x30 0x35 0x33 0x33 ,0x34 0x32 0x32 0x36 0x31 0x34 0x32 0x36 ,

[2026-01-05 10:03:13.147]# RECV ASCII>

   0x37 0x35 0x31 0x37 0x30 0x35 0x32 0x34 ,0x33 0x34 0x36 0x33 0x34 0x35 0x33 0x31 ,

the write training result:

DQS0:0x27, DQS1:0x19, DQS2:0x14, DQS3:0xa, 

min  :0x6c 0x70 0x71 0x6f 0x5f 0x65 0x69 0x68 0x65 ,0x59 0x58 0x50 0x54 0x5d 0x5b 0x5b 0x59 0x54 ,

      0x5c 0x5d 0x54 0x54 0x4d 0x4c 0x4e 0x52 0x53 ,0x4e 0x4b 0x48 0x44 0x50 0x51 0x4e 0x56 0x47 ,

mid  :0x89 0x8b 0x8c 0x8a 0x7a 0x7f 0x83 0x80 0x7e ,0x74 0x73 0x6a 0x6d 0x77 0x75 0x75 0x73 0x6f ,

      0x78 0x79 0x70 0x71 0x69 0x67 0x68 0x6d 0x6d ,

[2026-01-05 10:03:13.156]# RECV ASCII>

0x68 0x66 0x62 0x5f 0x6c 0x6c 0x68 0x6f 0x62 ,

max  :0xa6 0xa7 0xa8 0xa5 0x95 0x99 0x9e 0x99 0x97 ,0x90 0x8f 0x85 0x86 0x92 0x8f 0x90 0x8e 0x8b ,

      0x95 0x95 0x8c 0x8e 0x86 0x83 0x83 0x88 0x88 ,0x83 0x82 0x7c 0x7a 0x88 0x88 0x83 0x89 0x7e ,

range:0x3a 0x37 0x37 0x36 0x36 0x34 0x35 0x31 0x32 ,0x37 0x37 0x35 0x32 0x35 0x34 0x35 0x35 0x37 ,

      0x39 0x38 0x38 0x3a 0x39 0x37 0x35 0x36 0x35 ,0x35 0x37 0x34 0x36 0x38 0x37 0x35 0x33 0x37 ,

cs 1:

the read training result:

DQS0:0x2f, DQS1:0x33, DQS2:0x3

[2026-01-05 10:03:13.160]# RECV ASCII>

6, DQS3:0x30, 

min  : 0xc  0xb  0xf  0xc  0x1  0x2  0x6  0x1 , 0x9  0x9  0x3  0x1 0x10  0xb  0xf  0x7 ,

      0x12 0x12  0xd  0xa  0x7  0x1  0x5  0x6 , 0xc  0x7  0x6  0x2 0x10  0xf  0xd 0x10 ,

mid  :0x24 0x25 0x28 0x25 0x19 0x1c 0x20 0x1a ,0x24 0x22 0x1c 0x1c 0x29 0x25 0x27 0x22 ,

      0x2c 0x2c 0x26 0x26 0x20 0x1c 0x1e 0x20 ,0x25 0x22 0x22 0x1b 0x2b 0x2a 0x27 0x2a ,

max  :0x3c 0x40 0x42 0x3f 0x32 0x37 0x3a 0x34 ,0x3f 0x3c 0x36 0x38 0x43 0x3f 0x40 0x3d ,

      0x47 0x47 0x40 0x43 0x3a 0x38 0x37 0x3a 

[2026-01-05 10:03:13.162]# RECV ASCII>

,0x3f 0x3e 0x3e 0x35 0x46 0x45 0x41 0x44 ,

range:0x30 0x35 0x33 0x33 0x31 0x35 0x34 0x33 ,0x36 0x33 0x33 0x37 0x33 0x34 0x31 0x36 ,

      0x35 0x35 0x33 0x39 0x33 0x37 0x32 0x34 ,0x33 0x37 0x38 0x33 0x36 0x36 0x34 0x34 ,

the write training result:

DQS0:0x27, DQS1:0x19, DQS2:0x14, DQS3:0xa, 

min  :0x6b 0x6f 0x71 0x6d 0x5f 0x64 0x68 0x68 0x64 ,0x58 0x57 0x4f 0x51 0x5b 0x5b 0x5a 0x59 0x52 ,

      0x59 0x5b 0x54 0x51 0x4d 0x4b 0x4c 0x51 0x50 ,0x49 0x46 0x43 0x3f 0x4b 0x4b 0x49 0x50 0x41 ,

mid  :0x88 0x8b

[2026-01-05 10:03:13.167]# RECV ASCII>

 0x8d 0x89 0x79 0x7e 0x83 0x80 0x7d ,0x74 0x72 0x69 0x6b 0x76 0x75 0x75 0x73 0x6d ,

      0x76 0x77 0x6f 0x6e 0x68 0x66 0x67 0x6c 0x6c ,0x64 0x61 0x5e 0x5a 0x67 0x68 0x63 0x6a 0x5d ,

max  :0xa5 0xa8 0xaa 0xa5 0x94 0x99 0x9e 0x98 0x97 ,0x90 0x8e 0x84 0x86 0x91 0x8f 0x90 0x8e 0x89 ,

      0x93 0x93 0x8a 0x8b 0x84 0x81 0x82 0x87 0x88 ,0x80 0x7d 0x79 0x75 0x83 0x85 0x7e 0x85 0x7a ,

range:0x3a 0x39 0x39 0x38 0x35 0x35 0x36 0x30 0x33 ,0x38 0x37 0x35 0x35 0x36 0x34 0x36 0x35 0x37 ,

      0x3a 0x38 0x36 0x3a 0

[2026-01-05 10:03:13.177]# RECV ASCII>

x37 0x36 0x36 0x36 0x38 ,0x37 0x37 0x36 0x36 0x38 0x3a 0x35 0x35 0x39 ,

CA Training result:

cs:0 min  :0x4f 0x4c 0x47 0x3e 0x45 0x3c 0x4c ,0x4b 0x42 0x42 0x36 0x3d 0x36 0x4b ,

cs:0 mid  :0x8d 0x8d 0x83 0x80 0x82 0x7c 0x7d ,0x88 0x83 0x7c 0x79 0x79 0x78 0x79 ,

cs:0 max  :0xcb 0xce 0xbf 0xc2 0xbf 0xbd 0xae ,0xc5 0xc5 0xb7 0xbc 0xb5 0xba 0xa8 ,

cs:0 range:0x7c 0x82 0x78 0x84 0x7a 0x81 0x62 ,0x7a 0x83 0x75 0x86 0x78 0x84 0x5d ,

cs:1 min  :0x4e 0x51 0x44 0x45 0x44 0x42 0x4d ,0x48 0x49 0x40 0x40 0x3e 0x3f 0

[2026-01-05 10:03:13.249]# RECV ASCII>

x4a ,

cs:1 mid  :0x8e 0x8d 0x84 0x82 0x83 0x7e 0x7e ,0x88 0x85 0x7f 0x7c 0x7c 0x7b 0x79 ,

cs:1 max  :0xce 0xca 0xc4 0xbf 0xc3 0xbb 0xaf ,0xc9 0xc2 0xbf 0xb8 0xbb 0xb8 0xa9 ,

cs:1 range:0x80 0x79 0x80 0x7a 0x7f 0x79 0x62 ,0x81 0x79 0x7f 0x78 0x7d 0x79 0x5f ,

out

U-Boot SPL board init

U-Boot SPL 2017.09-ga1f6fc00a0-210413 #ldq (Apr 13 2021 - 11:35:00)

[2026-01-05 10:03:13.310]# RECV ASCII>

unknown raw ID phN

unrecognized JEDEC id bytes: 00, 00, 00

Trying to boot from MMC2

MMC error: The cmd index is 1, ret is -110

Card did not respond to voltage select!

mmc_init: -95, time 10

spl: mmc init failed with error: -95

Trying to boot from MMC1

[2026-01-05 10:03:13.424]# RECV ASCII>

SPL: A/B-slot: _a, successful: 0, tries-remain: 7

## Verified-boot: 0

## Checking atf-1 0x00040000 ... sha256+ OK

## Checking uboot 0x00a00000 ... sha256+ OK

## Checking fdt 0x00b1db28 ... sha256+ OK

## Checking atf-2 0xfdcc1000 ... sha256+ OK

## Checking atf-3 0x0006b000 ... sha256+ OK

## Checking atf-4 0xfdcd0000 ... sha256+ OK

## Checking atf-5 0xfdcce000 ... sha256+ OK

## Checking atf-6 0x00069000 ... sha256+ OK

## Checking optee 0x08400000 ... sha256+ OK

Jumping to U-Boot(0x00a00000) via ARM

[2026-01-05 10:03:13.436]# RECV ASCII>

 Trusted Firmware(0x00040000)

Total: 236.129 ms

INFO:    Preloader serial: 2

NOTICE:  BL31: v2.3():v2.3-607-gbf602aff1:cl

NOTICE:  BL31: Built : 10:16:03, Jun  5 2023

INFO:    GICv3 without legacy support detected.

INFO:    ARM GICv3 driver initialized in EL3

INFO:    pmu v1 is valid 220114

INFO:    dfs DDR fsp_param[0].freq_mhz= 1560MHz

INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz

INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz

INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz

INFO:    Using op

[2026-01-05 10:03:13.495]# RECV ASCII>

teed sec cpu_context!

INFO:    boot cpu mask: 0

INFO:    BL31: Initializing runtime services

INFO:    BL31: Initializing BL32

[2026-01-05 10:03:13.557]# RECV ASCII>

I/TC: 

I/TC: Start rockchip platform init

I/TC: Rockchip release version: 1.0

I/TC: OP-TEE version: 3.6.0-307-g0b06ae94 #1 Fri May  7 01:52:27 UTC 2021 aarch64

I/TC: Initialized

INFO:    BL31: Preparing for EL3 exit to normal world

INFO:    Entry point address = 0xa00000

INFO:    SPSR = 0x3c9

[2026-01-05 10:03:13.668]# RECV ASCII>

U-Boot 2017.09 (Apr 16 2025 - 11:11:14 +0800)

Model: Rockchip RK3568 Evaluation Board

PreSerial: 2, raw, 0xfe660000

DRAM:  4 GiB

Sysmem: init

Relocation Offset: ed35a000

Relocation fdt: eb9f8810 - eb9fece8

CR: M/C/I

Using default environment

dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0

[2026-01-05 10:03:13.834]# RECV ASCII>

Bootdev(atags): mmc 0

MMC0: HS200, 200Mhz

PartType: EFI

boot mode: recovery (misc)

FIT: No fdt blob

boot mode: None

Android 11.0, Build 2021.7, v2

Found DTB in boot part

DTB: rk-kernel.dtb

HASH(c): OK

ANDROID: fdt overlay OK

block num: 2048, name baseparameter ,type U-Boot,block size :512

-get- crc32 = 0X00000000

zts failed to read lcd crc32!

bl-delay 0 :0

bl-delay:1

bl-delay 0 :0

bl-delay-1:1

I2c0 speed: 100000Hz

PMIC:  RK8090 (on=0x40, off=0x00)

vdd_logic init 900000 uV

vdd_gpu init 9

[2026-01-05 10:03:13.898]# RECV ASCII>

00000 uV

vdd_npu init 900000 uV

io-domain: OK

Model: Rockchip RK3568 EVB2 LP4X V10 Board P568

Rockchip UBOOT DRM driver version: v1.0.1

VOP have 3 active VP

vp0 have layer nr:2[1 5 ], primary plane: 5

vp1 have layer nr:1[3 ], primary plane: 3

vp2 have layer nr:3[0 2 4 ], primary plane: 4

Using display timing dts

dsi@fe070000:  detailed mode clock 148500 kHz, flags[8000000a]

    H: 1920 2008 2052 2200

    V: 1080 1084 1089 1125

bus_format: 100e

VOP update mode to: 1920x1080p0, type: MIPI1 for V

[2026-01-05 10:03:13.953]# RECV ASCII>

P2

VOP VP2 enable Smart0[654x270->654x270@633x405] fmt[2] addr[0xedf2c000]

final DSI-Link bandwidth: 996 Mbps x 4

[2026-01-05 10:03:14.048]# RECV ASCII>

pwm_backlight_enable: Warning: ztl delay backlight skip enable GPIO 1

CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)

  apll 1416000 KHz

  dpll 780000 KHz

  gpll 1188000 KHz

  cpll 1000000 KHz

  npll 1200000 KHz

  vpll 24000 KHz

  hpll 148000 KHz

  ppll 200000 KHz

  armclk 1416000 KHz

  aclk_bus 150000 KHz

  pclk_bus 100000 KHz

  aclk_top_high 500000 KHz

  aclk_top_low 400000 KHz

  hclk_top 150000 KHz

  pclk_top 100000 KHz

  aclk_perimid 300000 KHz

  hclk_perimid 15

[2026-01-05 10:03:14.108]# RECV ASCII>

0000 KHz

  pclk_pmu 100000 KHz

Net:   eth0: ethernet@fe2a0000

Hit key to stop autoboot('CTRL+C'):  0 

## Booting FIT Image FIT: No fit blob

FIT: No FIT image

Android boot

ANDROID: reboot reason: "(none)"

[2026-01-05 10:03:14.592]# RECV ASCII>

ANDROID: Hash OK

optee api revision: 2.0

[2026-01-05 10:03:14.605]# RECV ASCII>

Booting IMAGE kernel at 0x00280000 with fdt at 0x0a100000...

Fdt Ramdisk skip relocation

## Booting Android Image at 0x0027f800 ...

Kernel load addr 0x00280000 size 30633 KiB

RAM disk load addr 0x0a200000 size 804 KiB

## Flattened Device Tree blob at 0x0a100000

   Booting using the fdt blob at 0x0a100000

   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK

  'reserved-memory' linux,cma: addr=10000000 size=800000

  'reserved-memory' ramoops@110000: addr=110000 size=f0000

   Using Device Tre

[2026-01-05 10:03:14.639]# RECV ASCII>

e in place at 000000000a100000, end 000000000a122615

vp0, plane_mask:0x22, primary-id:5, curser-id:-1

vp1, plane_mask:0x8, primary-id:3, curser-id:-1

vp2, plane_mask:0x15, primary-id:4, curser-id:-1

Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)

Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)

Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000)

Total: 1110.630 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]

[    0.000000] Linu

[2026-01-05 10:03:14.642]# RECV ASCII>

x version 4.19.193 (lwx224@ztlsz-PowerEdge-T640) (Android (6573524 based on r383902b) clang version 11.0.2 (https://android.googlesource.com/toolchain/llvm-project b397f81060ce6d701042b782172ed13bee898b79), LLD 11.0.2 (/buildbot/tmp/tmpF3FjA8 b397f81060ce6d701042b782172ed13bee898b79)) #49 SMP PREEMPT Wed Apr 16 11:14:28 CST 2025

[    0.000000] Machine model: Rockchip RK3568 EVB2 LP4X V10 Board P568

[    0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')

[    0.000000] bootconsole [uar

[2026-01-05 10:03:14.686]# RECV ASCII>

t8250] enabled

[    0.000000] Reserved memory: created CMA memory pool at 0x0000000010000000, size 8 MiB

[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool

[2026-01-05 10:03:14.728]# RECV ASCII>

[    0.000000] psci: probing for conduit method from DT.

[    0.000000] psci: PSCIv1.1 detected in firmware.

[    0.000000] psci: Using standard PSCI v0.2 function IDs

[    0.000000] psci: Trusted OS migration not required

[    0.000000] psci: SMC Calling Convention v1.2

[    0.000000] percpu: Embedded 24 pages/cpu s58840 r8192 d31272 u98304

[    0.000000] Detected VIPT I-cache on CPU0

[    0.000000] CPU features: detected: Virtualization Host Extensions

[    0.000000] CPU features: detected: Specul

[2026-01-05 10:03:14.731]# RECV ASCII>

ative Store Bypassing Safe (SSBS)

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1027656

[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.dtb_idx=0 androidboot.dtbo_idx=0 androidboot.slot_suffix= androidboot.serialno=6327dd8c98659f13 console=ttyFIQ0 androidboot.baseband=N/A androidboot.wificountrycode=CN androidboot.veritymode=enforcing androidboot.hardware=rk30board androidboot.console=ttyFIQ0 androidboot.verif

[2026-01-05 10:03:14.746]# RECV ASCII>

iedbootstate=orange firmware_class.path=/vendor/etc/firmware init=/init rootwait ro loop.max_part=7 buildvariant=userdebug earlycon=uart8250,mmio32,0xfe660000 androidboot.boot_devices=fe310000.sdhci,fe330000.nandc

[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off

[    0.000000] software IO TLB: mapped [mem 0xe9f00000-0xedf0

[2026-01-05 10:03:14.791]# RECV ASCII>

0000] (64MB)

[    0.000000] Memory: 3978884K/4175872K available (15486K kernel code, 2090K rwdata, 9028K rodata, 3968K init, 912K bss, 188796K reserved, 8192K cma-reserved)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] rcu: Preemptible hierarchical RCU implementation.

[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.

[    0.000000] 	Tasks RCU enabled.

[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[    0.0

[2026-01-05 10:03:14.798]# RECV ASCII>

00000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0

[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode

[    0.000000] GICv3: Distributor has no Range Selector support

[    0.000000] GICv3: no VLPI support, no direct LPI support

[    0.000000] ITS [mem 0xfd440000-0xfd45ffff]

[    0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @210000 (indirect, esz 8, psz 64K, shr 0)

[    0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @220000 (flat, esz 2, psz 64K, shr 0)

[

[2026-01-05 10:03:14.837]# RECV ASCII>

    0.000000] ITS: using cache flushing for cmd queue

[    0.000000] GIC: using LPI property table @0x0000000000230000

[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000

[    0.000000] CPU0: using LPI pending table @0x0000000000240000

[    0.000000] GIC: using cache flushing for LPI property table

[    0.000000] random: random: get_random_bytes called from start_kernel+0x22c/0x3d0 with crng_init=0

[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).

[    0.0

[2026-01-05 10:03:14.841]# RECV ASCII>

00000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns

[    0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns

[    0.001414] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)

[    0.002398] pid_max: default: 32768 minimum: 301

[    0.002891] Security Framework initialized

[    0.003274] SELinux:  Initializing.

[    0.003665] Mount-cache hash table entries:

[2026-01-05 10:03:14.853]# RECV ASCII>

 8192 (order: 4, 65536 bytes)

[    0.004286] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.006096] ASID allocator initialised with 32768 entries

[    0.006681] rcu: Hierarchical SRCU implementation.

[    0.007465] Platform MSI: interrupt-controller@fd440000 domain created

[    0.008384] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created

[    0.009820] smp: Bringing up secondary CPUs ...

[    0.010692] Detected VIPT I-cache on CPU1

[    0.0

[2026-01-05 10:03:14.857]# RECV ASCII>

10714] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000

[    0.010749] CPU1: using LPI pending table @0x0000000000250000

[    0.010785] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]

[    0.011288] Detected VIPT I-cache on CPU2

[    0.011307] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000

[    0.011340] CPU2: using LPI pending table @0x0000000000260000

[    0.011368] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]

[    0.011850] Detected VIPT I

[2026-01-05 10:03:14.860]# RECV ASCII>

-cache on CPU3

[    0.011867] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000

[    0.011900] CPU3: using LPI pending table @0x0000000000270000

[    0.011926] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]

[    0.011998] smp: Brought up 1 node, 4 CPUs

[    0.018820] SMP: Total of 4 processors activated.

[    0.019254] CPU features: detected: GIC system register CPU interface

[    0.019843] CPU features: detected: Privileged Access Never

[    0.020364] CPU features: detect

[2026-01-05 10:03:14.886]# RECV ASCII>

ed: LSE atomic instructions

[    0.020874] CPU features: detected: User Access Override

[    0.021360] CPU features: detected: 32-bit EL0 Support

[    0.021830] CPU features: detected: RAS Extension Support

[    0.028728] CPU: All CPU(s) started at EL2

[    0.029127] alternatives: patching kernel code

[    0.034579] devtmpfs: initialized

[    0.047588] Trying to unpack rootfs image as initramfs...

[    0.048094] Registered cp15_barrier emulation handler

[    0.048564] Registered setend emulation ha

[2026-01-05 10:03:14.896]# RECV ASCII>

ndler

[    0.049296] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[    0.050198] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.050922] pinctrl core: initialized pinctrl subsystem

[    0.052087] NET: Registered protocol family 16

[    0.057433] schedtune: configured to support 6 boost groups

[    0.058076] audit: initializing netlink subsys (disabled)

[    0.058715] audit: type=2000 audit(0.053:1): state=initialized audit_enabled=0 res

[2026-01-05 10:03:14.920]# RECV ASCII>

=1

[    0.060361] cpuidle: using governor menu

[    0.060761] Registered FIQ tty driver

[    0.061465] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.

[    0.062307] DMA: preallocated 256 KiB pool for atomic allocations

[    0.065790] console [pstore-1] enabled

[    0.066324] pstore: Registered ramoops as persistent store backend

[    0.066895] ramoops: attached 0xf0000@0x110000, ecc: 0/0

[    0.067739] Freeing initrd memory: 800K

[    0.083514] rockchip-gpio fdd60000.gpio: probed gpi

[2026-01-05 10:03:14.935]# RECV ASCII>

o0 (fdd60000.gpio)

[    0.084474] rockchip-gpio fe740000.gpio: probed gpio1 (fe740000.gpio)

[    0.085389] rockchip-gpio fe750000.gpio: probed gpio2 (fe750000.gpio)

[    0.086290] rockchip-gpio fe760000.gpio: probed gpio3 (fe760000.gpio)

[    0.087193] rockchip-gpio fe770000.gpio: probed gpio4 (fe770000.gpio)

[    0.087856] rockchip-pinctrl pinctrl: probed pinctrl

[    0.096299] cryptd: max_cpu_qlen set to 1000

[[    0.098060] console [ttyFIQ0] enabled

    0.098060] console [ttyFIQ0] enabled

[    0

[2026-01-05 10:03:14.953]# RECV ASCII>

.098728] bootconsole [uart8250] disabled

[    0.098728] bootconsole [uart8250] disabled

[    0.099263] Registered fiq debugger ttyFIQ0

[    0.099898] vcc3v3_sys: supplied by dc_12v

[    0.100128] vcc5v0_sys: supplied by dc_12v

[    0.100349] vcc5v0_usb: supplied by dc_12v

[    0.100655] vcc5v0_host: supplied by vcc5v0_usb

[    0.100928] vcc5v0_otg: supplied by vcc5v0_usb

[    0.101155] vcc2v5-sys: supplied by vcc3v3_sys

[    0.101405] vcc3v3_bu: supplied by vcc5v0_sys

[    0.101924] pcie30_3v3: su

[2026-01-05 10:03:14.958]# RECV ASCII>

pplied by dc_12v

[    0.102249] rk_iommu fde4b000.iommu: version = 2

[    0.102622] rk_iommu fdea0800.iommu: version = 2

[    0.102850] rk_iommu fded0480.iommu: version = 2

[    0.103110] rk_iommu fdee0800.iommu: version = 2

[    0.103355] rk_iommu fdef0800.iommu: version = 2

[    0.103569] rk_iommu fdf40f00.iommu: version = 2

[    0.103816] rk_iommu fdf80800.iommu: version = 2

[    0.104016] rk_iommu fe043e00.iommu: version = 2

[    0.104589] SCSI subsystem initialized

[    0.104769] usbcore: reg

[2026-01-05 10:03:14.963]# RECV ASCII>

istered new interface driver usbfs

[    0.104816] usbcore: registered new interface driver hub

[    0.104856] usbcore: registered new device driver usb

[    0.105163] media: Linux media interface: v0.10

[    0.105197] videodev: Linux video capture interface: v2.00

[    0.105261] pps_core: LinuxPPS API ver. 1 registered

[    0.105275] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.105296] PTP clock support registered

[    0.105497] arm-scmi firmware:sc

[2026-01-05 10:03:14.967]# RECV ASCII>

mi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0

[    0.107657] upandata_widgets_probe

[    0.107679] zts gtp_used :0

[    0.107693] zts lcd_bl_max_freq :0

[    0.107704] zts lcd_bl_delay :1

[    0.107713] zts sys_speaker_gain :0

[    0.107723] zts sys_mic_gain :0

[    0.107733] zts sys_codec_output :0

[    0.107742] zts primary_lcd :0

[    0.107751] zts extend_lcd :0

[    0.107761] zts hardwardvs :1350

[    0.107770] zts hdmi_mode :0

[    0.107779] zts disp_fb_width :0

[    0.107787] zt

[2026-01-05 10:03:14.972]# RECV ASCII>

s disp_fb_height :0

[    0.107800] zts sys_cfg_delay :1

[    0.107968] Advanced Linux Sound Architecture Driver Initialized.

[    0.108301] Bluetooth: Core ver 2.22

[    0.108348] NET: Registered protocol family 31

[    0.108361] Bluetooth: HCI device and connection manager initialized

[    0.108377] Bluetooth: HCI socket layer initialized

[    0.108390] Bluetooth: L2CAP socket layer initialized

[    0.108428] Bluetooth: SCO socket layer initialized

[    0.108768] rockchip-cpuinfo cpuinfo: SoC		: 3

[2026-01-05 10:03:14.999]# RECV ASCII>

5683000

[    0.108784] rockchip-cpuinfo cpuinfo: Serial		: d854c8aba76ddadc

[    0.109464] clocksource: Switched to clocksource arch_sys_counter

[    0.155931] VFS: Disk quotas dquot_6.6.0

[    0.156011] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.157086] thermal thermal_zone1: power_allocator: sustainable_power will be estimated

[    0.157319] NET: Registered protocol family 2

[    0.157782] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)

[    0.1

[2026-01-05 10:03:15.004]# RECV ASCII>

57823] TCP established hash table entries: 32768 (order: 6, 262144 bytes)

[    0.157963] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)

[    0.158307] TCP: Hash tables configured (established 32768 bind 32768)

[    0.158419] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[    0.158477] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[    0.158634] NET: Registered protocol family 1

[    0.160380] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available

[   

[2026-01-05 10:03:15.009]# RECV ASCII>

 0.161585] Initialise system trusted keyrings

[    0.161766] workingset: timestamp_bits=45 max_order=20 bucket_order=0

[    0.165379] utf8_selftest: All 154 tests passed

[    0.165401] fuse init (API version 7.27)

[    0.166388] 

[    0.166388] TEE Core Framework initialization (ver 1:0.1)

[    0.166418] TEE armv7 Driver initialization

[    0.166826] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"

[    0.166844] TEE core: Alloc the misc device "opteearmtz00" (id=0)

[    0.166991] TEE Co

[2026-01-05 10:03:15.014]# RECV ASCII>

re: Register the misc device "opteearmtz00" (id=0,minor=62)

[    0.168033] Key type asymmetric registered

[    0.168048] Asymmetric key parser 'x509' registered

[    0.168083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)

[    0.168097] io scheduler noop registered

[    0.168202] io scheduler cfq registered (default)

[    0.168217] io scheduler mq-deadline registered

[    0.168228] io scheduler kyber registered

[    0.168301] io scheduler bfq registered

[    0.169876] phy phy

[2026-01-05 10:03:15.033]# RECV ASCII>

-fe8a0000.usb2-phy.0: Linked as a consumer to regulator.5

[    0.170053] phy phy-fe8a0000.usb2-phy.1: Linked as a consumer to regulator.6

[    0.171072] extcon extcon1: failed to create extcon usb2-phy link

[    0.1

[2026-01-05 10:03:15.049]# RECV ASCII>

71167] phy phy-fe8b0000.usb2-phy.2: Linked as a consumer to regulator.5

[    0.171271] phy phy-fe8b0000.usb2-phy.3: Linked as a consumer to regulator.5

[    0.171341] phy phy-fe8b0000.usb2-phy.3: No vbus specified for otg port

[    0.177107] steve bl get enable gpio,add backlight delay 1s 

[    0.177155] pwm-backlight backlight: backlight supply power not found, using dummy regulator

[    0.177214] pwm-backlight backlight: Linked as a consumer to regulator.0

[    0.177361] pwm-backlight backlight1: ba

[2026-01-05 10:03:15.066]# RECV ASCII>

cklight1 supply power not found, using dummy regulator

[    0.177411] pwm-backlight backlight1: Linked as a consumer to regulator.0

[    0.177689] iep: Module initialized.

[    0.177744] mpp_service mpp-srv: f8412ae author: haozai 2025-01-02 2025/1/2 git deletes some files in the kernel directory that do not require management

[    0.177759] mpp_service mpp-srv: probe start

[    0.178316] iommu: Adding device fdf40000.rkvenc to group 5

[    0.178343] mpp_rkvenc fdf40000.rkvenc: Linked as a consumer to

[2026-01-05 10:03:15.082]# RECV ASCII>

 fdf40f00.iommu

[    0.178494] mpp_rkvenc fdf40000.rkvenc: probing start

[    0.178833] mpp_rkvenc fdf40000.rkvenc: venc regulator not ready, retry

[    0.178849] rkvenc_init:1199: failed to add venc devfreq

[    0.179778] iommu: Adding device fdea0400.vdpu to group 1

[    0.179809] mpp_vdpu2 fdea0400.vdpu: Linked as a consumer to fdea0800.iommu

[    0.179923] mpp_vdpu2 fdea0400.vdpu: probe device

[    0.180410] mpp_vdpu2 fdea0400.vdpu: probing finish

[    0.180796] iommu: Adding device fdee0000.vep

[2026-01-05 10:03:15.097]# RECV ASCII>

u to group 3

[    0.180820] mpp_vepu2 fdee0000.vepu: Linked as a consumer to fdee0800.iommu

[    0.180953] mpp_vepu2 fdee0000.vepu: probe device

[    0.181336] mpp_vepu2 fdee0000.vepu: probing finish

[    0.181683] iommu: Adding device fdef0000.iep to group 4

[    0.181710] mpp-iep2 fdef0000.iep: Linked as a consumer to fdef0800.iommu

[    0.181808] mpp-iep2 fdef0000.iep: probe device

[    0.182118] mpp-iep2 fdef0000.iep: allocate roi buffer failed

[    0.182237] mpp-iep2 fdef0000.iep: probing finis

[2026-01-05 10:03:15.113]# RECV ASCII>

h

[    0.182564] iommu: Adding device fded0000.jpegd to group 2

[    0.182592] mpp_jpgdec fded0000.jpegd: Linked as a consumer to fded0480.iommu

[    0.182682] mpp_jpgdec fded0000.jpegd: probe device

[    0.183104] mpp_jpgdec fded0000.jpegd: probing finish

[    0.183468] iommu: Adding device fdf80200.rkvdec to group 6

[    0.183496] mpp_rkvdec2 fdf80200.rkvdec: Linked as a consumer to fdf80800.iommu

[    0.183659] mpp_rkvdec2 fdf80200.rkvdec: probing start

[    0.183971] mpp_rkvdec2 fdf80200.rkvdec:

[2026-01-05 10:03:15.129]# RECV ASCII>

 shared_niu_a is not found!

[    0.183987] rkvdec2_init:661: No niu aclk reset resource define

[    0.184001] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!

[    0.184012] rkvdec2_init:664: No niu hclk reset resource define

[    0.184128] mpp_rkvdec2 fdf80200.rkvdec: sram_start 00000

[    0.184143] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000

[    0.184150] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056

[    0.184156] mpp_rkvdec2 fdf80200.rkvdec: rcb_size536

[    0.184164] mpp_rkv

[2026-01-05 10:03:15.145]# RECV ASCII>

dec2 fdf80200.rkvdec: min_width 512

0.184180] mpp_rkvdec2 fdf80200.rkvdec: link mode resource not fod

[    0.184339] mpp_rkvdec2 fdf80200.rkvdec: probing finish

[    0.184572] mpp_service mpp-srv: probe success

[    0.189002] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330

[.dmac: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16

dmac: Loaded driver for PL330 DMAC-241330

[    0.190451] dma-plNum_Chans-8 Num_Peri-32 Num_Events-16

[    0.191407] rockchip-sr: system monitor probe

[ 

[2026-01-05 10:03:15.161]# RECV ASCII>

   0.192292] Serial: 8250/16550 drive[    0.192906] fe670000.serial: ttyS1 at MMIO 0xfe670000 (irq = 0A

[    0.193306] fe680000.serial: ttyS3 at MMIO 0xfe680000 (ir16550A

[    0.193637] fe690000.serial: ttyS4 at MMIO 0xfe690000 a 16550A

[    0.193984] fe6c0000.serial: ttyS8 at MMIO 0xfe6c0 is a 16550A

[    0.195393] random: fast init done

[    0.1955op to group 7

[    0.195620] rockchip-vop2 fe040000.vop: Linked    0.195679] random: crng init done

[    0.199026] rockchip-drumer to fe040000.vop

[    

[2026-01-05 10:03:15.178]# RECV ASCII>

0.199721] rockchip-drm display-subsys000.hdmi

[    0.199974] rockchip-drm display-subsystem: Linked   0.199993] rockchip-drm display-subsystem: Linked as a consumerockchip-drm display-subsystem: defer getting devfreq

[    0.201drm:vop2_bind] vp0 assign plane mask: 0x22, primary plane phy id040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x8, primary kchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask:   0.201460] [drm] unsupported AFBC format[3432564e]

[    0.20170] rockchip-drm display-sub

[2026-01-05 10:03:15.192]# RECV ASCII>

system: bound fe040000.vop (ops vop2_mi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a wi0.202349] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare Hockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_pi-dsi fe060000.dsi: [drm:dw_mipi_dsi_bind] *ERROR* Failed to fi045] zts mipi vm pixelclock:148500000,1920,1080

[    0.208070] 920,1080

[    0.208081] ztl g_debug_mipi:1,lcd num:1

[    0.20 1920 1920 0 0x1

[    0.208128] panel-simple-dsi fe060000.dsi.0und, using dummy regulator

[2026-01-05 10:03:15.208]# RECV ASCII>

[    0.208197] panel-simple-dsi fe06 regulator.0

[    0.208223] panel-simple-dsi fe060000.dsi.0: feusing dummy regulator

[    0.208273] panel-simple-dsi fe060000. found, using dummy regulator

[    0.208447] zts mipi vm pixelc8465] zts mipi vm pixelclock:148500000,1920,1080

[    0.208480] 0.208496] zts p_gm8775_timing->hactive 1920 1920 1 0x3

[    0.i.0: fe070000.dsi.0 supply power not found, using dummy regulator

[    0.208565] panel-simple-dsi fe070000.dsi.0: Linked as a c88] panel-simple-dsi fe0700

[2026-01-05 10:03:15.222]# RECV ASCII>

00.dsi.0: fe070000.dsi.0 supply vsp n  0.208635] panel-simple-dsi fe070000.dsi.0: fe070000.dsi.0 supplator

[    0.208745] ztl gm8775 chip i2c init...

[    0.208780ali fde60000.gpu: Kernel DDK version g2p0-01eac0

[    0.209602]t initialization failed error = -517

[    0.209625] mali fde600vice initialization Deferred

[    0.209892] cacheinfo: Unable t

[    0.215032] brd: module loaded

[    0.224907] loop: module device: zram0

[    0.225503] SCSI Media Changer driver v0.25 

us: probed

[    0.227544] 

[2026-01-05 10:03:15.238]# RECV ASCII>

tun: Universal TUN/TAP device driver,ver interface

[    0.229067] mac rk_gmac_probe 2321

[    0.229t: no regulator found

[    0.229254] rk_gmac-dwmac fe2a0000.etht).

[    0.229268] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0xe2a0000.ethernet: RX delay(0x26).

[    0.229285] rk_gmac-dwmac (no).

[    0.234325] rk_gmac-dwmac fe2a0000.ethernet: init for  fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51

[    0.234t: 	DWMAC4/5

[    0.234579] rk_gmac-dwmac fe2a0000.ethernet: DM[    0.234590] rk_gmac-dwma

[2026-01-05 10:03:15.253]# RECV ASCII>

c fe2a0000.ethernet: RX Checksum Offl] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion support2a0000.ethernet: Wake-Up On Lan supported

[    0.234646] rk_gmarted

[    0.234660] rk_gmac-dwmac fe2a0000.ethernet: Enable RX     0.234670] mac stmmac_check_ether_addr 2157

[    0.234681] m 0.234694] rk_gmac-dwmac fe2a0000.ethernet: device MAC address 8gmac-dwmac fe2a0000.ethernet: TSO feature enabled

[2026-01-05 10:03:15.269]# RECV ASCII>

[    0.366149] libphy: stmmac: probed

[    0.367075] PPP generic driver version 2.4.2

[    0.367224] PPP BSD Compression module registered

[    0.367239] PPP Deflate Compression module registered

[    0.367271] PPP MPPE Compression module registered

[    0.367283] NET: Registered protocol family 24

[    0.367307] PPTP driver version 0.8.5

[    0.367527] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).

[    0.367539] CSLIP: code copyright 1989 Regents of 

[2026-01-05 10:03:15.285]# RECV ASCII>

the University of California.

[    0.367617] usbcore: registered new interface driver catc

[    0.367670] usbcore: registered new interface driver kaweth

[    0.367683] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver

[    0.367724] usbcore: registered new interface driver pegasus

[    0.367763] usbcore: registered new interface driver rtl8150

[    0.367801] usbcore: registered new interface driver r8152

[    0.367813] hso: drivers/net/usb/hso.c: Option Wireless

[    0.367868] us

[2026-01-05 10:03:15.300]# RECV ASCII>

bcore: registered new interface driver hso

[    0.367907] usbcore: registered new interface driver asix

[    0.367945] usbcore: registered new interface driver ax88179_178a

[    0.367983] usbcore: registered new interface driver cdc_ether

[    0.368020] usbcore: registered new interface driver cdc_eem

[    0.368061] usbcore: registered new interface driver dm9601

[    0.368098] usbcore: registered new interface driver smsc75xx

[    0.368140] usbcore: registered new interface driver smsc95xx

[    0.3

[2026-01-05 10:03:15.316]# RECV ASCII>

68178] usbcore: registered new interface driver gl620a

[    0.368220] usbcore: registered new interface driver net1080

[    0.368258] usbcore: registered new interface driver plusb

[    0.368296] usbcore: registered new interface driver rndis_host

[    0.368327] usbcore: registered new interface driver cdc_subset

[    0.368364] usbcore: registered new interface driver zaurus

[    0.368409] usbcore: registered new interface driver MOSCHIP usb-ethernet driver

[    0.368452] usbcore: registered new inte

[2026-01-05 10:03:15.332]# RECV ASCII>

rface driver int51x1

[    0.368489] usbcore: registered new interface driver kalmia

[    0.368526] usbcore: registered new interface driver ipheth

[    0.368562] usbcore: registered new interface driver sierra_net

[    0.368604] usbcore: registered new interface driver cx82310_eth

[    0.368645] usbcore: registered new interface driver cdc_ncm

[    0.369601] dwc3 fcc00000.dwc3: Failed to get clk 'ref': -2

[    0.373349] dwc3 fd000000.dwc3: Failed to get clk 'ref': -2

[    0.378389] ehci_hcd: USB 2.0

[2026-01-05 10:03:15.348]# RECV ASCII>

 'Enhanced' Host Controller (EHCI) Driver

[    0.378410] ehci-pci: EHCI PCI platform driver

[    0.378479] ehci-platform: EHCI generic platform driver

[    0.380681] ehci-platform fd800000.usb: EHCI Host Controller

[    0.380823] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1

[    0.380946] ehci-platform fd800000.usb: irq 11, io mem 0xfd800000

[    0.392827] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00

[    0.392980] ztl usb kobject_name(obj)=usb1

[    0.392999] 

[2026-01-05 10:03:15.364]# RECV ASCII>

usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[    0.393013] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.393025] usb usb1: Product: EHCI Host Controller

[    0.393035] usb usb1: Manufacturer: Linux 4.19.193 ehci_hcd

[    0.393045] usb usb1: SerialNumber: fd800000.usb

[    0.393383] hub 1-0:1.0: USB hub found

[    0.393426] hub 1-0:1.0: 1 port detected

[    0.395828] ehci-platform fd880000.usb: EHCI Host Controller

[    0.395971] ehci-pla

[2026-01-05 10:03:15.379]# RECV ASCII>

tform fd880000.usb: new USB bus registered, assigned bus number 2

[    0.396085] ehci-platform fd880000.usb: irq 13, io mem 0xfd880000

[    0.406153] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00

[    0.406283] ztl usb kobject_name(obj)=usb2

[    0.406300] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[    0.406314] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.406326] usb usb2: Product: EHCI Host Controller

[    0.406337] usb usb2

[2026-01-05 10:03:15.394]# RECV ASCII>

: Manufacturer: Linux 4.19.193 ehci_hcd

[    0.406347] usb usb2: SerialNumber: fd880000.usb

[    0.406650] hub 2-0:1.0: USB hub found

[    0.406688] hub 2-0:1.0: 1 port detected

[    0.407227] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    0.407255] ohci-platform: OHCI generic platform driver

[    0.407433] ohci-platform fd840000.usb: Generic Platform OHCI controller

[    0.407580] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3

[    0.407696] ohci-platform fd8

[2026-01-05 10:03:15.411]# RECV ASCII>

40000.usb: irq 12, io mem 0xfd840000

[2026-01-05 10:03:15.428]# RECV ASCII>

[    0.466941] ztl usb kobject_name(obj)=usb3

[    0.466959] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19

[    0.466967] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.466973] usb usb3: Product: Generic Platform OHCI controller

[    0.466979] usb usb3: Manufacturer: Linux 4.19.193 ohci_hcd

[    0.466985] usb usb3: SerialNumber: fd840000.usb

[    0.467285] hub 3-0:1.0: USB hub found

[    0.467324] hub 3-0:1.0: 1 port detected

[    0.467676]

[2026-01-05 10:03:15.442]# RECV ASCII>

 ohci-platform fd8c0000.usb: Generic Platform OHCI controller

[    0.467830] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4

[    0.467954] ohci-platform fd8c0000.usb: irq 14, io mem 0xfd8c0000

[2026-01-05 10:03:15.457]# RECV ASCII>

[    0.526943] ztl usb kobject_name(obj)=usb4

[    0.526962] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19

[    0.526969] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.526976] usb usb4: Product: Generic Platform OHCI controller

[    0.526982] usb usb4: Manufacturer: Linux 4.19.193 ohci_hcd

[    0.526987] usb usb4: SerialNumber: fd8c0000.usb

[    0.527289] hub 4-0:1.0: USB hub found

[    0.527328] hub 4-0:1.0: 1 port detected

[    0.528466]

[2026-01-05 10:03:15.473]# RECV ASCII>

 xhci-hcd xhci-hcd.1.auto: xHCI Host Controller

[    0.528613] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5

[    0.528756] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000011002010010

[    0.528802] xhci-hcd xhci-hcd.1.auto: irq 73, io mem 0xfd000000

[    0.529048] ztl usb kobject_name(obj)=usb5

[    0.529067] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[    0.529080] usb usb5: New USB device strings: Mfr=3, P

[2026-01-05 10:03:15.489]# RECV ASCII>

roduct=2, SerialNumber=1

[    0.529091] usb usb5: Product: xHCI Host Controller

[    0.529102] usb usb5: Manufacturer: Linux 4.19.193 xhci-hcd

[    0.529112] usb usb5: SerialNumber: xhci-hcd.1.auto

[    0.529426] hub 5-0:1.0: USB hub found

[    0.529486] hub 5-0:1.0: 1 port detected

[    0.529737] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller

[    0.529868] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 6

[    0.529883] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpe

[2026-01-05 10:03:15.505]# RECV ASCII>

ed

[    0.529951] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.

[    0.530061] ztl usb kobject_name(obj)=usb6

[    0.530079] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

[    0.530091] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.530102] usb usb6: Product: xHCI Host Controller

[    0.530108] usb usb6: Manufacturer: Linux 4.19.193 xhci-hcd

[    0.530114] usb usb6: SerialNumber: xhci-hcd.1.auto

[    0.530415]

[2026-01-05 10:03:15.521]# RECV ASCII>

 hub 6-0:1.0: USB hub found

[    0.530454] hub 6-0:1.0: 1 port detected

[    0.530795] usbcore: registered new interface driver cdc_acm

[    0.530811] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    0.530867] usbcore: registered new interface driver usblp

[    0.530924] usbcore: registered new interface driver cdc_wdm

[    0.531112] usbcore: registered new interface driver uas

[    0.531188] usbcore: registered new interface driver usb-storage

[    0.531235] usbcore:

[2026-01-05 10:03:15.537]# RECV ASCII>

 registered new interface driver ums-alauda

[    0.531285] usbcore: registered new interface driver ums-cypress

[    0.531322] usbcore: registered new interface driver ums-datafab

[    0.531365] usbcore: registered new interface driver ums_eneub6250

[    0.531407] usbcore: registered new interface driver ums-freecom

[    0.531448] usbcore: registered new interface driver ums-isd200

[    0.531489] usbcore: registered new interface driver ums-jumpshot

[    0.531528] usbcore: registered new interface dr

[2026-01-05 10:03:15.553]# RECV ASCII>

iver ums-karma

[    0.531562] usbcore: registered new interfacver ums-onetouch

[    0.531606] usbcore: registered new interface driver ums-sddr09

[    0.531647] usbcore: registered new intface driver ums-sddr55

[    0.531688] usbcore: registered new irface driver ums-usbat

[    0.531770] usbcore: registered new interface driver usbserial_generic

[    0.531791] usbserial: USBrial support registered for generic

[    0.531843] usbcore: regtered new interface driver option

[    0.531873] usbserial: USB 

[2026-01-05 10:03:15.566]# RECV ASCII>

Serial support registered for GSM modem (1-port)

[    0.532000ce driver trancevibrator

[    0.532502] usbcore: registered new52] usbcore: registered new interface driver usb_acecad

[    0.terface driver aiptek

[    0.532645] usbcore: registered new inusbcore: registered new interface driver hanwang

[    0.532730] driver kbtab

[    0.533172] cyttsp5_loader_init: Parade TTSP F74312) rc=0

[    0.533188] cyttsp5_device_access_init: Parade T03.08.874312) rc=0

[    0.533520] .. rk pwm remotectl v2.0 initm

[2026-01-05 10:03:15.583]# RECV ASCII>

 as /devices/platform/fe6e0030.pwm/input/input0

[    0.534008]rsion is 0x2130000

[    0.534074] remotectl-pwm fe6e0030.pwm: C   0.535063] i2c /dev entries driver

[    0.536731] fan53555-re Rev[15] Detected!

[    0.539935] vdd_cpu: supplied by vcc5v0_ss

[    0.542040] rk808 0-0020: chip id: 0x8090

[    0.542076] eading back from HW

[    0.565725] rk808 0-0020: source: on=0x40, off=0x00

[    0.565744] rk808 0-0020: support dcdc3 fb mode:-22, 0

[    0.565753] rk808 0-0020: support pmic reset mode:0,0

[2026-01-05 10:03:15.597]# RECV ASCII>

[    0.570536] rk808-regulator rk808-regulator: there is no dvs0 gpio

[    0.570575] rk808-regulator rk808-regulator: there is no dvs1 gpio

[    0.571110] vdd_logic: supplied by vcc3v3_sys

[    0.571674] vdd_gpu: supplied by vcc3v3_sys

[    0.571885] vcc_ddr: supplied by vcc3v3_sys

[    0.572117] vdd_npu: supplied by vcc3v3_sys

[    0.572666] vcc_1v8: supplied by vcc3v3_sys

[    0.572914] vdda0v9_image: supplied by vcc3v3_sys

[    0.573450] vdda_0v9: supplied by vcc3v3_sys

[    0.573659] vdda0v9_p

[2026-01-05 10:03:15.613]# RECV ASCII>

mu: supplied by vcc3v3_sys

[    0.573869] vccio_acodec: supplied by vcc3v3_sys

[    0.574402] vccio_sd: supplied by vcc3v3_sys

[    0.574611] vcc3v3_pmu: supplied by vcc3v3_sys

[    0.575154] vcca_1v8: supplied by vcc3v3_sys

[    0.575366] vcca1v8_pmu: supplied by vcc3v3_sys

[    0.575558] vcca1v8_image: supplied by vcc3v3_sys

[    0.576087] vcc_3v3: supplied by vcc3v3_sys

[    0.576660] vcc3v3_sd: supplied by vcc3v3_sys

[    0.576881] rk817-battery rk817-battery: Failed to find matching dt id

[  

[2026-01-05 10:03:15.632]# RECV ASCII>

  0.577066] rk817-charger rk817-charger: Failed to find matching dt id

[    0.579984] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input1

[    0.581545] goodix_ts_thread_probe() thread start

[    0.581566] jerry************skip gt9xx found chip:911

[    0.581606] Goodix-TS 1-0014: 1-0014 supply tp not found, using dummy regulator

[    0.581673] Goodix-TS 1-0014: Linked as a consumer to regulator.0

[    0.582522] ztl_gm8775_probe 337

[    0.582547] ztl rst_pin 

[2026-01-05 10:03:15.645]# RECV ASCII>

-2

[    0.582554] zts please check pll_int:74250000,468,17

[    0.582560] steve init-timing i2c cmd

[    0.582903] steveztsmipi i2c cmd 0x00 0xaa

[    0.583242] steveztsmipi i2c cmd 0x48 0x02

[    0.583579] steveztsmipi i2c cmd 0xb6 0x20

[    0.583916] steveztsmipi i2c cmd 0x01 0x80

[    0.584252] steveztsmipi i2c cmd 0x02 0x38

[    0.584590] steveztsmipi i2c cmd 0x03 0x47

[    0.584928] steveztsmipi i2c cmd 0x04 0x58

[    0.585265] steveztsmipi i2c cmd 0x05 0x2c

[    0.585601] steveztsmipi i2c c

[2026-01-05 10:03:15.660]# RECV ASCII>

md 0x06 0x94

[    0.585939] steveztsmipi i2c cmd 0x07 0x00

[    0.586279] steveztsmipi i2c cmd 0x08 0x04

[    0.586618] steveztsmipi i2c cmd 0x09 0x05

[    0.586953] steveztsmipi i2c cmd 0x0a 0x24

[    0.587292] steveztsmipi i2c cmd 0x0b 0x82

[    0.587631] steveztsmipi i2c cmd 0x0c 0x13

[    0.587971] steveztsmipi i2c cmd 0x0d 0x01

[    0.588310] steveztsmipi i2c cmd 0x0e 0x80

[    0.588642] steveztsmipi i2c cmd 0x0f 0x20

[    0.588982] steveztsmipi i2c cmd 0x10 0x20

[    0.589322] steveztsmipi 

[2026-01-05 10:03:15.677]# RECV ASCII>

i2c cmd 0x11 0x03

[    0.589661] steveztsmipi i2c cmd 0x12 0x1b

[    0.590001] steveztsmipi i2c cmd 0x13 0x53

[    0.590341] steveztsmipi i2c cmd 0x14 0x01

[    0.590680] steveztsmipi i2c cmd 0x15 0x23

[    0.591019] steveztsmipi i2c cmd 0x16 0x40

[    0.591357] steveztsmipi i2c cmd 0x17 0x00

[    0.591696] steveztsmipi i2c cmd 0x18 0x01

[    0.592035] steveztsmipi i2c cmd 0x19 0x23

[    0.592374] steveztsmipi i2c cmd 0x1a 0x40

[    0.592707] steveztsmipi i2c cmd 0x1b 0x00

[    0.593048] stevezts

[2026-01-05 10:03:15.692]# RECV ASCII>

mipi i2c cmd 0x1e 0x46

[    0.593388] steveztsmipi i2c cmd 0x51 0x30

[    0.593726] steveztsmipi i2c cmd 0x1f 0x11

[    0.594065] steveztsmipi i2c cmd 0x2a 0x01

[    0.594175] ztl_gm8775_probe 337

[    0.594195] ztl rst_pin -2

[    0.594206] zts please check pll_int:74250000,468,17

[    0.594215] steve init-timing i2c cmd

[    0.594554] steveztsmipi-1 i2c cmd 0x00 0xaa

[    0.594893] steveztsmipi-1 i2c cmd 0x48 0x02

[    0.595233] steveztsmipi-1 i2c cmd 0xb6 0x20

[    0.595566] steveztsmipi-1 i2c

[2026-01-05 10:03:15.708]# RECV ASCII>

 cmd 0x01 0x80

[    0.595905] steveztsmipi-1 i2c cmd 0x02 0x38

[    0.596247] steveztsmipi-1 i2c cmd 0x03 0x47

[    0.596586] steveztsmipi-1 i2c cmd 0x04 0x58

[    0.596925] steveztsmipi-1 i2c cmd 0x05 0x2c

[    0.597264] steveztsmipi-1 i2c cmd 0x06 0x94

[    0.597601] steveztsmipi-1 i2c cmd 0x07 0x00

[    0.597940] steveztsmipi-1 i2c cmd 0x08 0x04

[    0.598279] steveztsmipi-1 i2c cmd 0x09 0x05

[    0.598618] steveztsmipi-1 i2c cmd 0x0a 0x24

[    0.598958] steveztsmipi-1 i2c cmd 0x0b 0x82

[    0

[2026-01-05 10:03:15.724]# RECV ASCII>

.599297] steveztsmipi-1 i2c cmd 0x0c 0x13

[    0.599637] steveztsmipi-1 i2c cmd 0x0d 0x01

[    0.599979] steveztsmipi-1 i2c cmd 0x0e 0x80

[    0.600317] steveztsmipi-1 i2c cmd 0x0f 0x20

[    0.600656] steveztsmipi-1 i2c cmd 0x10 0x20

[    0.600989] steveztsmipi-1 i2c cmd 0x11 0x03

[    0.601329] steveztsmipi-1 i2c cmd 0x12 0x1b

[    0.601668] steveztsmipi-1 i2c cmd 0x13 0x53

[    0.602008] steveztsmipi-1 i2c cmd 0x14 0x01

[    0.602349] steveztsmipi-1 i2c cmd 0x15 0x23

[    0.602687] sztsmipi-1 i2

[2026-01-05 10:03:15.741]# RECV ASCII>

c cmd 0x16 0x40

[    0.603027] steveztsmipi-1 i2c c7 0x00

[    0.603366] steveztsmipi-1 i2c cmd 0x18 0x01

[    0.705] steveztsmipi-1 i2c cmd 0x19 0x23

[    0.604044] steveztsmi2c cmd 0x1a 0x40

[    0.604383] steveztsmipi-1 i2c cmd 0x1b 0x0 cmd 0x1e 0x46

[    0.605055] steveztsmipi-1 i2c cmd 0x51 0x30

md 0x1f 0x11

[    0.605732] steveztsmipi-1 i2c cmd 0x2a 0x01

[56 

[    0.607700] hym8563_rtc_read_all_register(109)

[    0.6[    0.607725] ztl register 0x1 value 0x0

[    0.607737] ztl re6] ztl regis

[2026-01-05 10:03:15.756]# RECV ASCII>

ter 0x3 value 0x29

[    0.607754] ztl register 0x4 er 0x5 value 0x5

[    0.607774] ztl register 0x6 value 0x21

[  0x21

[    0.607793] ztl register 0x8 value 0x26

[    0.607802 0.607813] ztl register 0xa value 0x80

[    0.607822] ztl regisztl register 0xc value 0x80

[    0.607831] ztl register 0xd valr 0xe value 0x23

[    0.607839] ztl register 0xf value 0x0

[  egister end(114)

[    0.607870] ztl hym8563_init_device:579

[ .609656] ztl hym8563_rtc_read_time:126

[    0.610662] ztl read , tm_mday 5,

[2026-01-05 10:03:15.772]# RECV ASCII>

 tm_wday 1, tm_mon 0, tm_year 126

[    0.610688] zt611686] ztl read time tm_sec 21, tm_min 29, tm_hour 1, tm_mday 5

[    0.611701] ztl hym8563_rtc_read_alarm:246

[    0.612433] hin -1,tm_hour -1,tm_mday -1

[    0.612896] ztl hym8563_rtc_readtime tm_sec 21, tm_min 29, tm_hour 1, tm_mday 5, tm_wday 1, tm_mtl hym8563_rtc_read_time:126

[    0.614920] ztl read time tm_sey 5, tm_wday 1, tm_mon 0, tm_year 126

[    0.615078] rtc-hym856563 as rtc0

[    0.615095] ztl hym8563_rtc_read_time:126

[    m_min 29, tm

[2026-01-05 10:03:15.787]# RECV ASCII>

_hour 1, tm_mday 5, tm_wday 1, tm_mon 0, tm_year 126: setting system clock to 2026-01-05 01:29:21 UTC (1767576561)

new interface driver uvcvideo

[    0.618489] USB Video Class drp-iodomain fdc20000.syscon:io-domains: Linked as a consumer to rp-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplickchip-iodomain fdc20000.syscon:io-domains: Linked as a consumerckchip-iodomain fdc20000.syscon:io-domains: vccio1(3300000 uV) s8900] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a 8926] rockch

[2026-01-05 10:03:15.803]# RECV ASCII>

ip-iodomain fdc20000.syscon:io-domains: vccio3(33000.618984] rockchip-iodomain fdc20000.syscon:io-domains: Linked as.619010] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(180.619084] rockchip-iodomain fdc20000.syscon:io-domains: Linked a.619105] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(33 0.619170] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(  0.619238] rockchip-iodomain fdc20000.syscon:io-domains: vccio7    0.620182] __power_supply_register: Expected proper parent de__power_supp

[2026-01-05 10:03:15.819]# RECV ASCII>

ly_register: Expected proper parent device for 'testthermal_zone2: power_allocator: sustainable_power will be estimaegister: Expected proper parent device for 'test_usb'

[    0.62c: tsadc is probed successfully!

[    0.622880] device-mapper: ] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: d] device-mapper: verity-avb: AVB error handler initialized with etooth: HCI UART driver ver 2.3

[    0.623284] Bluetooth: HCI U623514] cpu cpu0: leakage=35

[    0.623558] cpu cpu0: pvtm = 90cpu0: pvtm-v

[2026-01-05 10:03:15.834]# RECV ASCII>

olt-sel=1

[    0.624329] cpu cpu0: Linked as a cons] cpu cpu0: Dropping the link to regulator.10

[    0.624940] cpulator.10

[    0.625528] cpu cpu0: avs=0

[    0.625575] energymonotonically decreasing: em_cap_state 2 >= em_cap_state1

[     hyst=5000 l_limit=0 h_limit=0 h_table=0

[    0.630324] sdhci: erface driver

[    0.630347] sdhci: Copyright(c) Pierre Ossman

 Multimedia Card Interface Driver

[    0.631112] dwmmc_rockchipbit address mode.

[    0.631161] dwmmc_rockchip fe000000.dwmmc:   0.631180]

[2026-01-05 10:03:15.851]# RECV ASCII>

 dwmmc_rockchip fe000000.dwmmc: Version ID is 270a

000.dwmmc: DW MMC controller at irq 37,32 bit host data width,25ockchip fe000000.dwmmc: allocated mmc-pwrseq

[    0.631365] mmc[    0.656170] usb 2-1: new high-speed USB device number 2 using ehci-platform

[2026-01-05 10:03:15.867]# RECV ASCII>

[    0.734443] <<-GTP-ERROR->> I2C Read: 0x8000, 10 bytes failed, errcode: -6! Process reset.

[2026-01-05 10:03:15.881]# RECV ASCII>

[    0.804853] ztl usb kobject_name(obj)=2-1

[    0.804931] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00

[    0.804960] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[    0.804984] usb 2-1: Product: USB 2.0 Hub [MTT]

[    0.806417] hub 2-1:1.0: USB hub found

[    0.806772] hub 2-1:1.0: 7 ports detected

[    0.830412] <<-GTP-ERROR->> I2C Read: 0x8000, 10 bytes failed, errcode: -6! Process reset.

[    0.850462] mmc_host mmc3: Bus speed (slot 0) = 375

[2026-01-05 10:03:15.897]# RECV ASCII>

000Hz (slot req 400000Hz, actual 375000HZ div = 0)

[    0.864258] dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mode.

[    0.864388] dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller.

[    0.864414] dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a

[    0.864554] dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 41,32 bit host data width,256 deep fifo

[    0.864746] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.26

[    0.864885] dwmmc_rockchip fe2b000

[2026-01-05 10:03:15.913]# RECV ASCII>

0.dwmmc: Linked as a consumer to regulator.20

[    0.876767] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)

[    0.878535] mmc3: queuing unknown CIS tuple 0x10 (5 bytes)

[    0.886116] mmc_host mmc3: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)

[    0.886974] mmc3: queuing unknown CIS tuple 0x10 (5 bytes)

[    0.889949] sdhci-pltfm: SDHCI platform and OF driver helper

[    0.890971] mmc3: new SDIO card at address a047

[   

[2026-01-05 10:03:15.929]# RECV ASCII>

 0.891059] mmc2: Unknown controller version (5). You may experience problems.

[    0.922537] mmc2: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using ADMA

[    0.923965] hidraw: raw HID events driver (C) Jiri Kosina

[    0.926729] usbcore: registered new interface driver usbhid

[    0.926754] usbhid: USB HID core driver

[    0.926828] ion_device_add_heap: ion_system_contig_heap id=0 type=1

[    0.926837] orders[0] = 6

[    0.926853] orders[1] = 4

[    0.926866] orders[2] = 0

[    0.927099] i

[2026-01-05 10:03:15.944]# RECV ASCII>

on_device_add_heap: ion_system_heap id=1 type=0

[    0.927119] ion_device_add_heap: linux,cma id=2 type=4

[    0.927127] <<-GTP-ERROR->> I2C Read: 0x8000, 10 bytes failed, errcode: -6! Process reset.

[    0.927364] ashmem: initialized

[    0.927682] rockchip,bus bus-npu: Linked as a consumer to regulator.11

[    0.927707] rockchip,bus bus-npu: Failed to get leakage

[    0.927766] rockchip,bus bus-npu: pvtm = 90860, from nvmem

[    0.927786] rockchip,bus bus-npu: pvtm-volt-sel=1

[    0.927953] rockch

[2026-01-05 10:03:15.960]# RECV ASCII>

ip,bus bus-npu: avs=0

[    0.930289] rockchip-saradc fe720000.saradc: Linked as a consumer to regulator.22

[    0.930901] optee: probing for conduit method from DT.

[    0.930934] optee: revision 3.6 (0b06ae94)

[    0.931376] optee: initialized driver

[    0.931648] usbcore: registered new interface driver qmi_wwan_q

[    0.931668] 4g gpio get end

[    0.931857] atsh204a_probe

[    0.932056] atsh204a_init succeed atsh204a_init OK 

[    0.932562] input: chsc_cap_touch as /devices/platform/fe5a0000.i

[2026-01-05 10:03:15.976]# RECV ASCII>

2c/i2c-1/1-002e/input/input2

[    0.946398] [CHSC] function = semi_touch_read_bytes         , line = 254 : err code = -6

[    0.946624] [CHSC] function = semi_touch_read_bytes         , line = 254 : err code = -6

[    0.946851] [CHSC] function = semi_touch_read_bytes         , line = 254 : err code = -6

[    0.946869] [CHSC] function = semi_touch_init               , line = 360 : err code = -1

[    0.947522] [CHSC] function = semi_touch_probe              , line = 334 : err code = -1

[    0.94755

[2026-01-05 10:03:15.992]# RECV ASCII>

5] semi_touch: probe of 1-002e failed with error -1

[    0.947615] ztl it6151 chip i2c init...

[    0.947679] ztl nn it6151 0

[    0.947984] usbcore: registered new interface driver snd-usb-audio

[    0.949707] rk817-codec rk817-codec: DMA mask not set

[    0.950384] rk817_platform_probe

[    0.950407] rk817_codec_parse_dt_property()

[    0.950466] rk817_codec_parse_dt_property : spk-ctl-gpio 117

[    0.950481] rk817_codec_parse_dt_property() Can not read property hp-mute-delay-ms

[    0.950493] sp

[2026-01-05 10:03:16.008]# RECV ASCII>

k mute delay 200ms --- hp mute delay 0ms

[    0.953878] netem: version 1.3

[    0.953904] u32 classifier

[    0.953910]     Actions configured

[    0.954436] xt_time: kernel timezone is -0000

[    0.954536] gre: GRE over IPv4 demultiplexor driver

[    0.954550] IPv4 over IPsec tunneling driver

[    0.955101] Initializing XFRM netlink socket

[    0.955130] IPsec XFRM device driver

[    0.955451] NET: Registered protocol family 10

[    0.956381] Segment Routing with IPv6

[    0.956471] mip6: Mobile

[2026-01-05 10:03:16.023]# RECV ASCII>

 IPv6

[    0.957055] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver

[    0.957792] NET: Registered protocol family 17

[    0.957825] NET: Registered protocol family 15

[    0.957906] Bridge firewalling registered

[    0.957985] can: controller area network core (rev 20170425 abi 9)

[    0.958088] NET: Registered protocol family 29

[    0.958106] can: raw protocol (rev 20170425)

[    0.958119] can: broadcast manager protocol (rev 20170425 t)

[    0.958134] can: netlink gateway (rev 20170425) ma

[2026-01-05 10:03:16.039]# RECV ASCII>

x_hops=1

[    0.958401] Bluetooth: RFCOMM TTY layer initialized

[    0.958426] Bluetooth: RFCOMM socket layer initialized

[    0.958464] Bluetooth: RFCOMM ver 1.11

[    0.958480] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[    0.958493] Bluetooth: BNEP filters: protocol multicast

[    0.958509] Bluetooth: BNEP socket layer initialized

[    0.958522] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[    0.958536] Bluetooth: HIDP socket layer initialized

[    0.958562] l2tp_core: L2TP core drive

[2026-01-05 10:03:16.055]# RECV ASCII>

r, V2.0

[    0.958579] l2tp_ppp: PPPoL2TP kernel driver, V2.0

[    0.958590] [BT_RFKILL]: Enter rfkill_rk_init

[    0.958601] [WLAN_RFKILL]: Enter rfkill_wlan_init

[    0.959080] [WLAN_RFKILL]: Enter rfkill_wlan_probe

[    0.959125] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6398s

[    0.959139] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.

[    0.959150] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.

[    0.959189] [WLAN_RFKILL]: wlan_platdat

[2026-01-05 10:03:16.070]# RECV ASCII>

a_parse_dt: WIFI,host_wake_irq = 124, flags = 0.

[    0.959200] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !

[    0.959213] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio

[    0.959227] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1

[    0.959238] [WLAN_RFKILL]: Exit rfkill_wlan_probe

[    0.959787] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 73.

[    0.959821] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 96.

[    0.959841] [BT_R

[2026-01-05 10:03:16.086]# RECV ASCII>

FKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 98.

[    0.959860] [BT_RFKparse_dt: get property: BT,wake_host_irq = 97.

[    0.959918] [BT_RFKILL]: Request irq for bt wakeup host

[    0.960001] [BT_RFKILL]: ** disable irq

[    0.960139] [BT_RFKILL]: bt_default dce registered.

[    0.962192] registered taskstats version 1

[.962196] mmc2: new HS200 MMC card at address 0001

[    0.962232Loading compiled-in X.509 certificates

[    0.962372] Key type ._fscrypt registered

[    0.962389

[2026-01-05 10:03:16.102]# RECV ASCII>

] Key type .fscrypt registered

[    0.962401] Key type fscrypt-provisioning registered

[   sion: deflate

[    0.963171] mmcblk2: mmc2:0001 SPeMMC 29.1 GiB:0001 SPeMMC partition 1 4.00 MiB

[    0.964339] mmcblk2boot1: iB

[    0.964446] rga2: Driver loaded successfully ver:3.2.63310001 SPeMMC partition 3 4.00 MiB, chardev (237:0)

[    0.964787.967933]  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p1[    0.998585] mpp_rkvenc fdf40000.rkvenc: probing start

[    0.999336] mpp_rkvenc fdf40000.rkvenc

[2026-01-05 10:03:16.118]# RECV ASCII>

: Linked as a consumer to regulator.11

[    0.999376] mpp_rkvenc fdf40000.rkvenc: Failed to get leakage

[    0.999431] mpp_rkvenc fdf40000.rkvenc: pvtm = 90860, from nvmem

[    0.999446] mpp_rkvenc fdf40000.rkvenc: pvtm-volt-sel=1

[    0.999716] mpp_rkvenc fdf40000.rkvenc: avs=0

[    0.999873] mpp_rkvenc fdf40000.rkvenc: failed to find power_model node

[    0.999895] mpp_rkvenc fdf40000.rkvenc: failed to initialize power model

[    0.999911] mpp_rkvenc fdf40000.rkvenc: failed to get dynamic-coefficie

[2026-01-05 10:03:16.133]# RECV ASCII>

nt

[    1.000387] mpp_rkvenc fdf40000.rkvenc: probing finish

[    1.003711] rockchip-drm display-subsystem: defer getting devfreq

[    1.004018] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x22, primary plane phy id: 5

[    1.004042] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x8, primary plane phy id: 3

[    1.004060] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x15, primary plane phy id: 4

[    1.004786] rockchip-drm display-subsy

[2026-01-05 10:03:16.149]# RECV ASCII>

stem: bound fe040000.vop (ops vop2_component_ops)

[    1.004964] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)

[    1.005765] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver

[    1.007327] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)

[    1.007391] rockchip-drm display-subsystem: bound fe060000.dsi (ops dw_mipi_dsi_ops)

[    1.007432] rockchip-drm display-subsystem: bound fe070000.dsi (ops dw_

[2026-01-05 10:03:16.164]# RECV ASCII>

mipi_dsi_ops)

[    1.007444] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    1.007460] [drm] No driver support for vblank timestamp query.

[    1.023757] <<-GTP-ERROR->> I2C Read: 0x8000, 10 bytes failed, errcode: -6! Process reset.

[2026-01-05 10:03:16.180]# RECV ASCII>

[    1.087976] vendor storage:20190527 ret = 0

[    1.120217] <<-GTP-ERROR->> I2C Read: 0x8000, 10 bytes failed, errcode: -6! Process reset.

[    1.140774] rockchip-drm display-subsystem: fb0:  frame buffer device

[    1.142380] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0

[    1.142939] mali fde60000.gpu: Kernel DDK version g2p0-01eac0

[    1.143173] mali fde60000.gpu: Linked as a consumer to regulator.12

[    1.143322] mali fde60000.gpu: dev_pm_opp_set_regulators: no re

[2026-01-05 10:03:16.197]# RECV ASCII>

gulator (shadercores) found: -19

[    1.143447] mali fde60000.gpu: leakage=10

[    1.143498] mali fde60000.gpu: pvtm = 90860, from nvmem

[    1.144223] mali fde60000.gpu: avs=0

[    1.144261] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 112; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.

[    1.144760] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0

[    1.144900] mali fde60000.gpu: No memory group manager is configured

[   

[2026-01-05 10:03:16.211]# RECV ASCII>

 1.145641] mali fde60000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0

[    1.146774] mali fde60000.gpu: Probed as mali0

[    1.147436] input: adc-keys as /devices/platform/adc-keys/input/input3

[    1.148064] rockchip-dmc dmc: Linked as a consumer to regulator.11

[    1.148095] ERROR: could not get clock /dmc:dmc_clk(0)

[    1.148111] rockchip-dmc dmc: Cannot get the clk dmc_clk. If using SCMI, trusted firmware need update to V1.01 and above.

[    1.148159] rockchip-dmc dmc: Dr

[2026-01-05 10:03:16.227]# RECV ASCII>

opping the link to regulator.11

[    1.148191] rockchip-dmc: probe of dmc failed with error -2

[    1.149064] asoc-simple-card hdmi-sound: i2s-hifi <-> fe400000.i2s mapping ok

[    1.150316] rk817_probe

[    1.154075] rk817_set_dai_sysclk : MCLK = 12288000Hz

[    1.154093] rk817_set_dai_fmt : i2s slave mode

[    1.154522] asoc-simple-card rk809-sound: rk817-hifi <-> fe410000.i2s mapping ok

[    1.157061] It doesn't contain Rogue gpu

[    1.157524] rockchip_headset rk-headset: Can not read property h

[2026-01-05 10:03:16.241]# RECV ASCII>

ook_gpio

[    1.157548] rockchip_headset rk-headset: have not set adc chan

[    1.157563] rockchip_headset rk-headset: headset have no hook mode

[    1.157754] input: rk-headset as /devices/platform/rk-headset/input/input4

[    1.158327] iommu: Adding device fde40000.npu to group 0

[    1.158361] RKNPU fde40000.npu: Linked as a consumer to fde4b000.iommu

[    1.158841] RKNPU fde40000.npu: RKNPU: rknpu iommu is enabled, using iommu mode

[    1.158959] RKNPU fde40000.npu: Linked as a consumer to regula

[2026-01-05 10:03:16.257]# RECV ASCII>

tor.14

[    1.158987] RKNPU fde40000.npu: can't request region for resource [mem 0xfde40000-0xfde4ffff]

[    1.159494] [drm] Initialized rknpu 0.4.2 20210701 for fde40000.npu on minor 1

[    1.159767] RKNPU fde40000.npu: leakage=5

[    1.159814] RKNPU fde40000.npu: pvtm = 90860, from nvmem

[    1.160332] RKNPU fde40000.npu: avs=0

[    1.160945] RKNPU fde40000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0

[    1.160978] RKNPU fde40000.npu: failed to find power_model node

[    1.160993

[2026-01-05 10:03:16.272]# RECV ASCII>

] RKNPU fde40000.npu: RKNPU: failed to initialize power model

[    1.161006] RKNPU fde40000.npu: RKNPU: failed to get dynamic-coefficient

[    1.161482] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[    1.162425] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[    1.163366] rockchip-pm rockchip-suspend: not set pwm-regulator-config

[    1.163967] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_re

[2026-01-05 10:03:16.289]# RECV ASCII>

v_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '11:13:39', on 'Apr 16 2025'.

[    1.164367] Mali: 

[    1.164368] Mali device driver loaded

[    1.164557] ALSA device list:

[    1.164571]   #0: rockchip,hdmi

[    1.164582]   #1: rockchip,rk809-codec

[    1.166328] Freeing unused kernel memory: 3968K

[    1.166446] Run /init as init process

[    1.166644] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2

[    1.166660] cfg80211: failed to load re

[2026-01-05 10:03:16.304]# RECV ASCII>

gulatory.db

[    1.169096] init: init first stage started!

[    1.169274] init: Unable to open /lib/modules, skipping module loading.

[    1.169679] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt

[    1.170521] init: Using Android DT directory /proc/device-tree/firmware/android/

[    1.206143] ztl enable bl 2.2

[    1.214444] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/by-name/metadata

[    1.214562] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not

[2026-01-05 10:03:16.320]# RECV ASCII>

 cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46

[    1.214688] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory

[    1.214788] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk2p11 (executable not in system image)

[    1.217033] <<-GTP-ERROR->> I2C Read: 0x8000, 10 bytes failed, errcode: -6! Process reset.

[    1.220369] EXT4-fs (mmcblk2p11): recovery complete

[    1.220659] EXT4-fs (mmcblk2p11): mounted fi

[2026-01-05 10:03:16.335]# RECV ASCII>

lesystem with ordered data mode. Opts: discard

[    1.220765] init: [libfs_mgr]__mount(source=/dev/block/by-name/metadata,target=/metadata,type=ext4)=0: Success

[    1.222143] init: Failed to copy /avb into /metadata/gsi/dsu/avb/: No such file or directory

[    1.232650] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1

[    1.243568] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1

[    1.246419] EXT4-fs (dm-4): mounted filesystem without journal. Opts: barrier=1

[2026-01-05 10:03:16.351]# RECV ASCII>

[    1.246908] devfreq fde60000.gpu: Couldn't update frequency transition information.

[    1.253487] EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1

[    1.259521] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1

[2026-01-05 10:03:16.366]# RECV ASCII>

[    1.312885] <<-GTP-ERROR->> I2C read 0x8000, 10 bytes, double check failed!

[    1.312911] <<-GTP-ERROR->> Failed to get chip-type, set chip type default: GOODIX_GT9

[    1.313802] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -6! Process reset.

[    1.362481] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory

[    1.362670] fsck.f2fs: fsck.f2fs terminated by exit(255)

[    1.362670] 

[    1.366008] F2FS-fs (dm-5): Found nat_bits in checkpoint

[    1.372386] 

[2026-01-05 10:03:16.381]# RECV ASCII>

F2FS-fs (dm-5): recover fsync data on readonly fs

[    1.372690] F2FS-fs (dm-5): Mounted with checkpoint version = 13bd4aa2

[    1.402979] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory

[    1.403276] fsck.f2fs: fsck.f2fs terminated by exit(255)

[    1.403276] 

[    1.406549] F2FS-fs (dm-5): Found nat_bits in checkpoint

[    1.409526] <<-GTP-ERROR->> GTP i2c test failed time 1.

[    1.413380] F2FS-fs (dm-5): Mounted with checkpoint version = 13bd4aa2

[    1.427278] <<-G

[2026-01-05 10:03:16.399]# RECV ASCII>

TP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -6! Process reset.

[    1.433097] init: 37 output lines suppressed due to ratelimiting

[2026-01-05 10:03:16.455]# RECV ASCII>

[    1.510963] CPU wait for data succeed,0

[    1.511488] zts thread_function :0

[    1.522919] <<-GTP-ERROR->> GTP i2c test failed time 2.

[    1.540677] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -6! Process reset.

[    1.577498] init: Loading SELinux policy

[    1.614923] SELinux:  policy capability network_peer_controls=1

[    1.614971] SELinux:  policy capability open_perms=1

[    1.614980] SELinux:  policy capability extended_socket_class=1

[    1.614987] SELinux:  policy capab

[2026-01-05 10:03:16.569]# RECV ASCII>

ility always_check_network=0

[    1.614993] SELinux:  policy capability cgroup_seclabel=0

[    1.615000] SELinux:  policy capability nnp_nosuid_transition=1

[    1.625100] phy phy-fe8a0000.usb2-phy.1: charger = USB_SDP_CHARGER

[    1.636227] <<-GTP-ERROR->> GTP i2c test failed time 3.

[    1.653864] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -6! Process reset.

[    1.682862] ---headsetobserve_work---

[2026-01-05 10:03:16.627]# RECV ASCII>

[    1.752887] <<-GTP-ERROR->> GTP i2c test failed time 4.

[    1.770416] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -6! Process reset.

[    1.780672] audit: type=1403 audit(1767576562.663:2): auid=4294967295 ses=4294967295 lsm=selinux res=1

[    1.780807] selinux: SELinux: Loaded policy from /odm/etc/selinux/precompiled_sepolicy

[    1.780829] selinux: 

[    1.785889] selinux: SELinux: Loaded file_contexts

[    1.785925] selinux: 

[    1.789514] old_status == headset_info->headset_st

[2026-01-05 10:03:16.708]# RECV ASCII>

atus

[    1.814907] init: init second stage started!

[    1.861185] init: Using Android DT directory /proc/device-tree/firmware/android/

[    1.862210] cpuid:a76ddadcd854c8aba76ddadc

[    1.862210] 

[    1.862250] audit: type=1400 audit(1767576562.743:3): avc:  denied  { read } for  pid=1 comm="init" name="device_id" dev="sysfs" ino=11798 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[    1.866169] <<-GTP-ERROR->> GTP i2c test failed time 5.

[    1.870308] init: Couldn't 

[2026-01-05 10:03:16.714]# RECV ASCII>

load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory

[    1.871861] init: Setting product property ro.product.brand to 'rockchip' (from ro.product.product.brand)

[    1.871914] init: Setting product property ro.product.device to 'rk3568_r' (from ro.product.product.device)

[    1.871951] init: Setting product property ro.product.manufacturer to 'rockchip' (from ro.product.product.manufacturer)

[    1.871991] init: Setting product property ro.prod

[2026-01-05 10:03:16.721]# RECV ASCII>

uct.model to 'rk3568_r' (from ro.product.product.model)

[    1.872031] init: Setting product property ro.product.name to 'rk3568_r' (from ro.product.product.name)

[    1.872088] init: Setting property 'ro.build.fingerprint' to 'rockchip/rk3568_r/rk3568_r:11/RQ3A.210705.001/eng.lwx224.20250416.111036:user/release-keys'

[    1.874805] selinux: SELinux: Loaded file_contexts

[    1.882910] <goodix_ts_thread_probe>_2845    I2C communication ERROR!

[    1.882932]    <goodix_ts_thread_probe>_2920  prob error 

[2026-01-05 10:03:16.761]# RECV ASCII>

!!!!!!!!!!!!!!!

[    1.920056] audit: type=1107 audit(1767576562.803:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc:  denied  { read } for property=persist.sys.adb_enable pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1'

[    1.920520] audit: type=1107 audit(1767576562.803:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc:  denied  { read } for property=flash.success pid=0 uid=0 gid=0 scontext=u:r:ven

[2026-01-05 10:03:16.815]# RECV ASCII>

dor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1'

[2026-01-05 10:03:16.894]# RECV ASCII>

[    2.050057] ueventd: ueventd started!

[    2.052667] selinux: SELinux: Loaded file_contexts

[    2.052708] selinux: 

[    2.053058] ueventd: Parsing file /system/etc/ueventd.rc...

[    2.053964] ueventd: Parsing file /vendor/ueventd.rc...

[    2.055183] ueventd: Parsing file /ztloem/ueventd.rc...

[    2.055234] ueventd: Unable to read config file '/ztloem/ueventd.rc': open() failed: No such file or directory

[    2.055268] ueventd: Parsing file /ueventd.rk30board.rc...

[    2.055298] ueventd: Una

[2026-01-05 10:03:16.956]# RECV ASCII>

ble to read config file '/ueventd.rk30board.rc': open() failed: No such file or directory

[2026-01-05 10:03:17.094]# RECV ASCII>

[    2.206983] EXT4-fs (mmcblk2p15): mounted filesystem with ordered data mode. Opts: noauto_da_alloc

[    2.211720] audit: type=1400 audit(1767576563.093:6): avc:  denied  { read } for  pid=1 comm="init" name="upan_data" dev="sysfs" ino=11796 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

[2026-01-05 10:03:17.172]# RECV ASCII>

[    2.286874] apexd: This device does not support updatable APEX. Exiting

[2026-01-05 10:03:17.438]# RECV ASCII>

[    2.539588] zts thread_function :1

[    2.539623] zts 4g reset ok:1,rockchip_soc_id:0x35683000,3566:0x35660000

[2026-01-05 10:03:17.561]# RECV ASCII>

[    2.670202] bifrost_kbase: disagrees about version of symbol module_layout

[2026-01-05 10:03:17.638]# RECV ASCII>

[    2.752508] ueventd: Coldboot took 0.696 seconds

[2026-01-05 10:03:17.715]# RECV ASCII>

[    2.829730] Registered swp emulation handler

[2026-01-05 10:03:17.742]# RECV ASCII>

[    2.898979] audit: type=1400 audit(1767576563.780:7): avc:  denied  { map } for  pid=167 comm="read_pcie_info." path="/system/bin/sh" dev="overlay" ino=18844 scontext=u:r:read_pcie_info:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1

[    2.899112] audit: type=1400 audit(1767576563.780:8): avc:  denied  { read } for  pid=167 comm="read_pcie_info." path="/system/bin/sh" dev="overlay" ino=18844 scontext=u:r:read_pcie_info:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1